Industry News

  • ISPE Water System Guideline

    ISPE Water System Guideline

    Pharmaceutical equipment and piping systems rely extensively on stainless steel, to provide the non-reactive, corrosion-resistant construction needed in manufacturing and heat sterilization. However, thermoplastics are available that may offer improved qualities or lower costs. Less expensive pla...
    Read more
  • The Common Troubleshooting Of Stainless Steel Air Shower

    The Common Troubleshooting Of Stainless Steel Air Shower

    1. Power switch. Generally, there are three places in the stainless steel air shower room to cut off the power supply: 1). The power switch on the outer box; 2). The control panel on the inner box; 3). Both sides on the outer boxes (the power switch here can prevent the power supply from being cu...
    Read more
  • Classification Of Cleanroom Transfer Window

    Classification Of Cleanroom Transfer Window

    The transfer window is an orifice device used to block airflow when transferring objects inside and outside the cleanroom or between the cleanrooms, to prevent contamination from spreading with the transfer of objects. Mainly divided into the following categories: 1. Mechanical type The transfer...
    Read more
  • Combined Air Conditioning Unit For Clean Room

    Combined Air Conditioning Unit For Clean Room

    The combined air conditioner uses the way that the parts and components ex-factory, have the combination and installation on the field. Box shell adopts composite insulation board, and the sandwich layer adopts flam-retardant polystyrene foam board which can resist rust and corrosion, and have ex...
    Read more
  • Class 10,000 (Partial Class 100) Clean Laboratory

    Class 10,000 (Partial Class 100) Clean Laboratory

    The clean room differs in airflow design according to different grades. Generally, it can be divided into vertical laminar flow (Class1-100), horizontal laminar flow (Class1-1,000), and turbulent flow (Class1,000-100,000). The detailed distinction is as follows: Airflow method Cleanliness Win...
    Read more
  • Basic Knowledge Of Clean Room Testing Technology

    Basic Knowledge Of Clean Room Testing Technology

    Clean room testing technology, also known as contamination control technology. Refers to the control of contaminants in the environment (substances that affect the quality, qualification rate or success rate of products, humans and animals) during processing, disposal, treatment, and protection T...
    Read more
  • Clean Room Classifications

    Clean Room Classifications

    Clean room must meet the standards of the International Organization of Standardization (ISO) in order to be classified. The ISO was founded in 1947 to implement international standards for sensitive aspects of scientific research and business practices, such as the work of chemicals, volatile ma...
    Read more
  • Compressed Air System In The Animal Laboratory

    Compressed Air System In The Animal Laboratory

    1. The compressed air host is installed on the roof of the room. The compressed air must be dried and filtered to ensure the cleanliness of the compressed air. The compressed air pipeline adopts galvanized steel pipe and the working pressure of the pipeline is designed to be 0.8Mpa and the flow ...
    Read more
  • Sterilization Method Of Biological Cleanroom

    Sterilization Method Of Biological Cleanroom

    The biological cleanroom is not only relied on the method of air filtration, so that the amount of biological or non-biological micro-organisms in the air sent into the cleanroom is strictly controlled, but also disinfects the surfaces of indoor appliances, floors, walls, and other surfaces. Ther...
    Read more