Steel clean room doors are generally used for purification rooms or workshops. The clean door is of high-quality materials, good quality, can effectively isolate dust from entering, the surface is flat, and the appearance quality is superior. It is easy to install, high in efficiency, and low in cost compared to manual production; it has better sound absorption, sound insulation and good fire resistance.Generally, the clean door of the factory building is made of color steel plate. If the clean steel door is with the brick wall, it depends on whether the wall is a firewall.
According to the requirements of the specification, the enclosure structure and interior decoration of the purification workshop should be made of materials with good airtightness and small deformation under the action of temperature and humidity changes, and the surfaces of the walls and ceilings should be smooth, flat, and dust-free. Materials that do not fall out of dust, are corrosion-resistant, impact-resistant, easy to clean, and avoid glare.
1. Manual board library board type:
1) Connect with a central aluminum connector, and then fix it with fasteners. The fasteners are sealed with caps. The door frames are sealed with special silica gel to maintain integrity and aesthetics. Pay attention to maintaining the level and verticality of the installation;
2) The central aluminum connection is used directly, and the door frame is sealed with special silica gel around the door frame to maintain integrity and aesthetics, and pay attention to maintaining the level and verticality of the installation;
3) Use trough aluminum parts to install and fasten around the door hole to adjust the size of the door hole, and then the door frame is embedded in an embedded manner, and then fastened to the trough part. The surroundings are sealed with special silica gel to maintain integrity and aesthetics. Pay attention to maintaining Installation level and verticality.
2. Board type of mechanism board library:
First install galvanized grooves on the side of the door opening mechanism, and then install the steel clean door frame in the form of a clamp, fix it with fasteners, seal the fasteners with caps, and seal the door frames with special silicone to keep them Integrity and aesthetics, pay attention to maintaining the level and verticality of the installation.